203
edits
Changes
Jump to navigation
Jump to search
→Rig & Sail Plan: inserted rig and mainsail information along with mk-i runners example thumb
== Rig & Sail Plan ==
[[File:MK-I-Runners.jpg|thumb|MK-I with supported mast tip, double spreaders, and possible running backstays]]
The Impulse 26 was produced with several different rig configurations according to multiple owners that have compared different builds in person. The most common configuration produced was a ⅞ fractional rig with a single set of spreaders and a permanent backstay connected to the unsupported mast tip. A handful of the earlier builds were produced with the ⅞ fractional rig, double spreaders, a supported mast tip, and running backstays. This configuration was reportedly overly complicated and weak, to the point that mast breakage was common.<ref>Jangles13, [[http://forums.sailinganarchy.com/index.php?/topic/39355-impulse-26/&do=findComment&comment=3065253 Sailing Anarchy Forums]], November 16, 2010</ref>
=== Mainsail ===
The Over-sized ⅞ fractional rig on an Impulse 26 equates to a rather large mainsail and boom. The Impulse 26 mainsail is generally loose footed with two full length battens at the top and 3 partial battens on the bottom ⅔ of the sail. Thus the boat was designed with many controls to handle the large amount of power it can produce in a fresh breeze.
<br />
Those controls are as follows
*6:1 mainsheet
*Recessed main sheet traveler
*16:1 boomvang
*4:1 outhaul
*32:1 magicbox permanent backstay
=== Headsails ===
=== Spinnaker ===
