Difference between revisions of "Kodi (formally XBMC)/wiimote"

From Wiki.CoreyBlair.US
Jump to navigation Jump to search
m
m
Line 5: Line 5:
 
* Next answer yes to any questions regarding space usage by the packages being installed.
 
* Next answer yes to any questions regarding space usage by the packages being installed.
 
* Now open the battery cover on the wiimote and locate the internal red button. (leave batteries installed)
 
* Now open the battery cover on the wiimote and locate the internal red button. (leave batteries installed)
* Go back to command line and issue <code>hcitool scan</code> and immediately press the internal red button on the wiimote.
+
* Go back to command line and issue
 +
 
 +
<code>hcitool scan</code>  
 +
 
 +
and immediately press the internal red button on the wiimote.
 
*In the Command line you should get an output that goes something like this  
 
*In the Command line you should get an output that goes something like this  
 
<code>00:1F:32:FC:D8:C9      Nintendo RVL-CNT-01</code>
 
<code>00:1F:32:FC:D8:C9      Nintendo RVL-CNT-01</code>

Revision as of 09:35, 24 November 2015

Installing & Configuring Wiimote for Kodibuntu

  • Open command line and issue

sudo apt-get install bluez kodi-eventclients-wiiremote

  • Next answer yes to any questions regarding space usage by the packages being installed.
  • Now open the battery cover on the wiimote and locate the internal red button. (leave batteries installed)
  • Go back to command line and issue

hcitool scan

and immediately press the internal red button on the wiimote.

  • In the Command line you should get an output that goes something like this

00:1F:32:FC:D8:C9 Nintendo RVL-CNT-01

  • You should either take a screenshot of the Bluetooth mac address or write it down somewhere.
  • Finally you need to edit the config file located at

sudo nano /etc/rc.local

and insert the following at the bottom

kodi-wiiremote --btaddr 00:1F:32:FC:D8:C9 &

  • Make sure this is inserted before "exit 0"
  • Obviously you will need to replace the mac address with the one that you wrote down earlier.
  • Don't leave out the "&" at the end of the insertion.
  • Save the file and restart.
  • Once restarted all you need to do is hold down the 1 and 2 buttons and it should connect soon after.